The floor is the largest surface in any building and the first thing a visitor sees. When it is washed for years with a cloth and ordinary detergent, the dirt does not come off but settles in the pores and microscratches - so the granite in the entrance takes on a gray shade, the marble loses its shine, and the vinyl becomes cloudy no matter how often it is washed. Machine cleaning solves precisely that layer that manual washing does not reach. It is done in stages. A machine with rotating brushes or pads breaks up the deposits, simultaneously rinsing and vacuuming the dirty water, so that the dirt is removed instead of smeared. After that, depending on the substrate, there is polishing or a protective coating that restores the shine and facilitates subsequent maintenance. Crystallization is used for hard stone floors, deep degreasing for epoxies and concrete, and extraction washing for textile floor coverings. The type of substrate determines everything. Marble and granite require diamond pads and agents that do not corrode the stone, epoxy does not tolerate aggressive chemistry, vinyl and linoleum are washed with milder agents so as not to remove the protective layer, while industrial concrete requires stronger machines and higher pressure. A wrong choice here does not mean a weaker result but permanent damage. It is most often required in areas with high traffic - shopping centers, hotels, halls, office buildings and catering facilities. The usual rhythm is two to four times a year as a supplement to regular maintenance, or once before the opening of the facility and after renovation. This page shows agencies that do machine cleaning and floor washing. For each, you can see the cities they cover, services, year of establishment, number of employees and approximate price. The contact is direct - Spremačica.me does not mediate and does not charge a commission.